Millennia HV-3C

2 kanaals mic pre

Bel 0512 - 340457 of neem contact op!

HV-3C

Unsurpassed ambience retrieval
Transformerless design with matched hi-speed discrete transistor octet has +23 dBu input headroom: no attenuator “pads” needed
Uncolored timbral accuracy at all dynamic levels
Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
Effortless, vividly realistic musical performance
Laser-trimmed FET-based output stage has +32 dBu headroom: drives 1000 foot (300 m) cable runs with ease
Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
Ultra-clean universal power supply (100-240VAC)
Grayhill mil-spec gold switching
Mogami Neglex OFC audio wiring
Silver Teflon power wiring
Welded 16 gauge steel rack chassis
Lovingly hand-crafted in Northern California

Minimum Gain
8.5 dB

Maximum Gain (1.5 dB per step, 36 steps)
60 dB (up to 70 dB on request)

Frequency Response (+0 / -3 dB)
sub 8 Hz to beyond 300 kHz (sub 3 Hz by request)

Noise (60 dBu Gain, 10 Hz - 30 kHz, Inputs common)
-133 dB EIN

Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz - 20 kHz bandwidth, +27 dBu Out)
< .001%, Typ. < .0005% (< 5 ppm)

Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out
< .0009%

Phase Response (35 dB Gain, 50 Hz - 20 kHz bandwidth, +27 dBu Out)
< 2 degrees deviation

Common Mode Rejection Ratio (35 dB Gain, 10 Hz - 20 kHz bandwidth, 100 mV C.M.)
> 65 dB, Typ > 85 dB

Slew Rate (35 dB Gain, +27 dBu Out)
> 25 Volts per microsecond

Maximum Input Level (20 Hz - 40 kHz)
+23 dBu (no attenuator pads required)

Maximum Output Level (20 Hz - 40 kHz)
+32 dBu

Phantom Input Impedance (1 kHz)
6,750 ohms

Output Impedance
24.3 Ohms (x2)

DPA (B&K) Mic Powering
+130 V dc max, (non-phantom)

Phantom Powering
+48 V dc, +/- 4 V dc

Power Consumption
12 watts maximum

Power Requirements
100V to 240V, 50/60 Hz

Dimensions/Shipping Weight
19” W x 1.75” H x 12” D, 15 lbs..